First name is Bear
Joined on April 26th of '04
Lives in JACKSONVILLE- But I am a Ga native., FL
Local time: 04:05 PM
PM Posts: 4946

car parts like that here...................you know Americans .........Everything we have is Huge........

Attachment: tri-star 1.jpg
This has been downloaded 77 time(s).

__________________
DON'T POKE A BEAR WITH A SHORT STICK!!

I.D.G.A.F.H.T.D.I.A.O.C.C.

I ONLY WORK ON SCOOTS I LIKE, WHEN I FEEL LIKE IT, IF IT PAYS ENOUGH!!!!!!

If life deals you a sh!+ sandwich,only eat the crust !

http://www.facebook.com/group.php?gid=113891248624992

Report post | Post #31 of 45

Joined on February 29th of '08
Lives in ireland, Europe
Local time: 09:05 PM
PM | Posts: 47

quote:

Originally posted by YONA http://www.chopperweb.info/forum/attachment.php?s=&postid=320475 This ''might" be what Dave is talking about....no driveshaft or chain....was going to comment the other day , but the missus arrived at the library early........Don't most use a mid-box, like a Yammy 1100.............[

the drive shaft is on there in the picture,if you look close.its still using the origional bike drive shaft.ill see if i have a good picture of it.antway here is a picture of the brakes.the discs are off an opel corsa,and the calipers are off a vw mk2

Attachment: 333.jpg
This has been downloaded 74 time(s).

Report post | Post #32 of 45

Joined on February 29th of '08
Lives in ireland, Europe
Local time: 09:05 PM
PM | Posts: 47

here,i hope this is ok.

Attachment: 444.jpg
This has been downloaded 74 time(s).

Report post | Post #33 of 45

Joined on February 29th of '08
Lives in ireland, Europe
Local time: 09:05 PM
PM | Posts: 47

i turn these down to join the new wider axle tubes back into the differential.

Attachment: 555.jpg
This has been downloaded 76 time(s).

Report post | Post #34 of 45

Premium Member

First name is Dan
Joined on October 2nd of '03
Lives in Montgomery, AL
Local time: 03:05 PM
PM | AIM Posts: 5354

Wow, that's clean. I can see why you wouldn't want to cover that up.

I've always envisioned a trike with skinny spoked rear wheels and an oak and stainless rear deck like a vintage pick up.
After seeing that rear end, it would have to be removable or have hinges.

...is that a parking brake lever?

Report post | Post #35 of 45

First name is Not So Fat Mike
Joined on April 2nd of '05
Lives in Knoxville, TN
Local time: 05:05 PM
PM | SITE Posts: 1979

You guys still have all that old stuff running around for parts.
HERE, everything has gone to the scrap yards. Boooo!! Coming back as Jap, or Chinese steel.

Closest we could get to it here is a Mustang 2 or Toyota.

Bear, when ya going to get that "thang" together???

FM

__________________
Old and grumpy

People ask me how come I look so young for my age...

Answer: Low stress and lots of Jack Daniels. Scratch that, insulin and heart pills.

Report post | Post #36 of 45

Joined on February 29th of '08
Lives in ireland, Europe
Local time: 09:05 PM
PM | Posts: 47

ya,got to have the parking brake over here,its good though saves me running down the road trying to catch the trike,me and running dont get along.i have to go over to the uk to get these axles,so i wait till im getting a load of stuff.i cant get nothing here in ireland.the front end , wheel ,carburetor,gas tank,aluminium round bar,and hand controls came from the usa.rear axle and engine ,and rear wheels from the uk. postage can be expensive,then the customs over here try to charge you again for parts that you cant get here.right im done crying now.

Report post | Post #37 of 45

Premium Member

First name is Dan
Joined on October 2nd of '03
Lives in Montgomery, AL
Local time: 03:05 PM
PM | AIM Posts: 5354

Excellent! I guess most home builds have them, or figure out they need them later after a good scare. Great craftsmanship.

Report post | Post #38 of 45

First name is Bear
Joined on April 26th of '04
Lives in JACKSONVILLE- But I am a Ga native., FL
Local time: 04:05 PM
PM Posts: 4946

Like eating better..............

Report post | Post #39 of 45

First name is Not So Fat Mike
Joined on April 2nd of '05
Lives in Knoxville, TN
Local time: 05:05 PM
PM | SITE Posts: 1979

I know about you're situation on getting parts.

I tried to build a custom when stationed in Spain. RIGHT..
If it was too big a box or too heavy, it wouldn't come through a FPO. (fleet post office)

FM

Report post | Post #40 of 45

Joined on November 25th of '09
Lives in ireland, Europe
Local time: 09:05 PM
PM Posts: 17

For my build I was lucky to get an old 73 opel ant the back axle seems to be first class. On a trial run to see how it ran I was able to get28mph in first gear so should be good for well over the ton. I will try and post some pics of the build so far but you will see its not up to danneys standard. Thought about cutting the axle down a bit but would have cost too much.
pat

Last edited by PAT 1 on 03-12-2010 at 11:45 PM

Report post | Post #41 of 45

Joined on February 29th of '08
Lives in ireland, Europe
Local time: 09:05 PM
PM | Posts: 47

ya, i would like to see some pics of that bike triked.

Report post | Post #42 of 45

Premium Member

First name is dave
Joined on August 18th of '04
Lives in Bung Hole, LA
Local time: 03:05 PM
PM | Posts: 10163

fuckin' really nice work..

__________________
Better To Be Judged By 12 Than To Be Carried By 6

Report post | Post #43 of 45

First name is shithead
Joined on June 1st of '05
Lives in columbia, SC
Local time: 04:05 PM
PM Posts: 926

does the extreme angle on that drive shaft going to be a problem or is it not extreme enough because it is rigid?

__________________
later,
shithead

Report post | Post #44 of 45

Joined on February 29th of '08
Lives in ireland, Europe
Local time: 09:05 PM
PM | Posts: 47

no it dont seem to be causing any problems.i had it set up for a different engine a xv920. when i changed to this engine it put a bit more angle on the drive shaft,works fine though.

Report post | Post #45 of 45